|
practical base plate included
There are two extra large base plates included with your SA XP30. You can use them if your floor is not quite even. You also get rubber feet, spikes and spike pads. Rubber feet are recommended for hard floors, while spikes preferably can be used if you have carpets.
technology is down-scaled from more expensive speakers
One of the reasons for the big sound is XL technology used in the woofers. The special construction makes the membranes of the woofers move longer, which gives a far deeper bass response than normal in a small woofer. SA XP30 is using woofers, which are downscaled from SA ranger.
sophisticated and refined
SA is respected for our tremendously refined loudspeakers. The strong cabinet is made of 18 mm MDF to avoid coloring of the sound. The front plate is even 25 mm thick! The entire front panel around the drive units is covered by 5 mm neoprene rubber, and around the tweeter you'll find a special type of foam that removes reflections and makes the sound extra clear and pleasant. The 50 mm thick plinth under the speaker is machined out of one piece massive MDF. Here you will find the big gold-plated input terminals.
technical specifications
dimensions (WxHxD) cm: 14.5 x 100 x 14.5 recommended amplifier: 50 watts min power handling: 135 Watts frequency range + / - 3 dB: 45-35.000 Hz impedance: 4-8 Ohm (easy load) recommended placement: floor, 10-20 cm from back wall sensitivity (1W, 1m): 88 dB |